Before the Walls Go Up
Why We'd Rather Be On Your Job at Framing
We've been on a lot of new construction lately, working alongside builders, GCs and electricians across South Jersey. The jobs that go well have one thing in common. We got the call before the drywall went up. Here's why that matters.
An open wall is worth more than you think
Right now, before insulation, a camera drop is a drill and a staple. Ten minutes. Same wire after drywall is a fishing job, a patch, a painter, and a soffit you didn't want in the first place.
The wire costs the same either way. Everything around it doesn't.
That's the whole pitch. There isn't a clever version of it.
Cheapest day of the whole project
We work around your trades, not through them
Builders don't need another sub showing up whenever they feel like it.
We walk the job at framing with the GC and the electrician. We agree on where our runs go before anybody pulls a single wire. We stay out of the electrician's bays, keep our data and alarm cable off the line voltage, and we're in and out before insulation.
Then we mark and label everything. When you call us back a few months later to add a camera at the side door, we already know what's behind that wall.
New construction beach house in Ventnor NJ. Pre inspection.
Inspections are our problem, not yours
This is the part that catches people.
In New Jersey, low-voltage permit requirements aren't the same everywhere. Some towns want a UCC permit for security and cabling work, some don't. Fire alarm is a different animal entirely — that's a separately licensed trade with its own permit and its own inspection, and it gets held to NFPA 70 / NFPA 72 .
Either way, if it has to be inspected, it gets inspected at rough-in — before anything is covered. Miss that window and you're opening a finished wall to show an inspector a wire.
We deal with the permits and we're there for the inspection. You shouldn't have to learn how your town handles this.
While we're already in the walls: Sonos
This started as a favor on one job. Now we do it on a ton of them.
We install Sonos Architectural by Sonance — in-ceiling, in-wall, and outdoor speakers, run off a Sonos Amp. The grilles sit flush and take paint, so once your painter's done the speakers basically disappear into the ceiling. No boxes on shelves, no wires down a wall, nothing sitting on a countertop.
It's the same idea as the cameras. The speaker wire is cheap and easy today and expensive and ugly in a year.
Worth saying: even if the homeowner isn't ready to buy the gear, run the wire. Cap it in the ceiling. It costs almost nothing now and it's there when they want it.
The Result: One less thing that goes sideways at the end
Builders we work with get:
✅ Cameras, alarm, access control and audio designed at framing phase
✅ Permits pulled and rough-in inspections covered.
✅ Labeled, documented runs
✅ No drywall cut open after the fact.
Got a Job Coming Up?
If you're breaking ground or framing something this year, call us early. Even if you're not sure what you’re looking for yet, we can walk it and tell you what to rough in. That conversation is free and it's saved a few of our homeowners / builders a lot of money.
📞 Contact us today at (856) 298-1943 to schedule a free on-site consultation. Or click here to get a quote ASAP
